In this video I set up a MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR!
Using USALS (Universal Satellites Automatic Location System) to perfectly align all satellites in the geostationary ark of satellites, to receive the #FreeSatelliteTV channels.
You can get one of these and a dish system at https://www.facebook.com/pg/FreeSatelliteTV1/shop
www.FreeSatelliteTV.Net
#tech #FTA #FreeToAirSatellite

Using the motorized SG2100 system, the dish moves from east to west to track satellites along the Clarke Belt. Suitable for any offset dish with a U-bolt or pole mounting up to a 120 cm satellite dish.

Works with all DiSEqC 1.2, 1.3, Goto X compatible receivers. It uses a data stream that is led to the holder via the coaxial LNB cable. Only one coaxial cable is required for installation.

MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR
https://ebay.us/ikRXjS

39/" HIGH GAIN KU BAND SATELLITE FTA DISH + DUAL LINEAR FREE TO AIR LNB 97 W 95
https://ebay.us/91ktFI

Amiko Mini HD265 FTA Receiver DVB-S2 H.265 HEVC With NTP
http://ebay.us/Y8JHoW

39 Dish, Motor and Dish https://ebay.us/LgZX7V

FUNCTIONS:

Fits all popular dishes with a 42 mm tube
Special design for any receiver with DiSEqC 1.2
Only one coaxial cable control
Go to X function
Compact structure
Ultra-low noise
Three key parameters are required to properly align a motorized c-band (TVRO) dish for viewing the entire satellite arc or the Clarke Belt.

1. Azimuth angle (true south/non-magnetic south);

2. Elevation angle;

3. Declination angle;

Use a compass to point your dish south and use the map below to find the altitude and declination angle of your /"modified/" polar mountain.

Once you start locking in satellite transponders, you can fine-tune your azimuth, elevation and declination angles until you reach all satellite signals. Lock your dish.
https://www.tvrosat.com/resources.html

https://www.DishPointer.com/

To find channels and transponder frequencies http://SatHint.com/ and https://www.LyngSat.com/
—————————————— —– —————————————- ———- —
Go to the Dish Alignment table in your manual or at https://www.tvrosat.com/resources.html
Enter your latitude and altitude into the engine. Mine was Lattude 44 and my Elivation was 46
For my declination angle on the DISH, I subtracted the declination angle
(Degrees) 6.07° from the elevation angle (Degrees)44.66°
44.66° – 6.07° = 37.96 (37.96 The angle of inclination on the dish)

Use a compass to find your true southern location.
go to www.DishPointer.com and find your latitude and longitude. Enter that into your receivers USALS (Universal Satellites Automatic Location System) under your engine settings.
The plumb pole is really crucial in these setups.
And to find your true south satellite, go to the satellite closest to your highest and southernmost part of the ark (true south should be 0 on the engine) where your longitude is set to the nearest Saturday that you can pin to it.
In my case I am at 76.48 West, so I moved the dish's Azimuth to 87 West. And then adjusted the azimuth until I got a signal on the receiver.
I adjusted the declination angle on the dish to fine-tune the signal to within a hair and get a better signal. I moved it with half a baby finger and lost the signal.

++++++++++++++++++++++++++++++++++++++++++++++++ ++ +++

Need a VPN
Use the Express VPN service. Sign up here and click on my referral link.
https://www.linkev.com/?a_fid=freesatellitetv
++++++++++++++++++++++++++++++++++++++++++++++++ ++ +++

Please consider supporting my work
https://www.paypal.com/donate/?token=QKzEirXJqq0FTbnGEmr3zZUYnrEJk9b7E5JktI6qe_RWThkac4gqudDIUwhd7Ugo-cMjfm&country.x=CA&locale.x=CA

https://www.patreon.com/RobbieStrike

Learn more about Satellite and other things by sitting back and checking out these playlists

https://www.youtube.com/user/ottawaoctane/playlists

Buy this stuff – https://www.facebook.com/pg/FreeSatelliteTV1/shop

https://www.youtube.com/user/ottawaoctane/videos

https://www.facebook.com/RobbieStrikeVideos/

https://twitter.com/robbiestrike3

(c) Robbie Strike 2020 http://www.RobbieStrike.com

www.FreeSatelliteTV.net

Introduction: (0:00)
Dish Pointer website: (0:46)
SatFinder Light Android app for your phone: (2:08)
SatHint and websites with free channels!; (2:42)
Unpacking Satellite Dish Motor: (4:06)
Satellite Finder Kit: (8:11)
Attaching the satellite dish to the motorcycle: (9:30)
Placing a motorized satellite dish on a tripod: (10:40)
Dish moves to different satellite positions: (13:05)
Calculate your declination angle: (13:29)
Real South: (14:56)
Setting up USALS on a satellite receiver:(15:57)
Galaxy 19 97 west: (16:59)
Satellite receiver settings: (17:45)
Satellite switches DiSEqC and 22k and splitters: (19:12)
Don't let this happen to you: (23:06)
Saucer moves over the geostationary ark: (23:19)
Channels: (26:25)

Please take the opportunity to connect and share this video with your friends and family if you find it useful.